Ultrasonic Leak Detection
I use industrial acoustic imaging cameras and ultrasonic detectors to locate and tag accessible leaks, estimate their flow and cost, and produce a prioritized repair list. Access and operating conditions are agreed with your team.
When this helps
Compressors that never unload, air you can hear at night, or a leak list that never gets shorter.
What you receive
Every accessible leak found tagged and located, with its estimated flow and cost, in a repair list ordered by payback.
What the service covers
Acoustic imaging
A microphone array helps locate the sound of escaping air in operating plants. Detection distance and certainty depend on pressure, leak size, background noise, and line of sight; uncertain locations are identified for follow-up.
CFM quantification
Leak flow is estimated using the survey method and measured pressure. Annual cost estimates state the assumed operating hours, compressor performance, and energy rate so maintenance can prioritize repairs.
Tagged repair list
Each leak is tagged, located, and prioritized by payback, so your maintenance team can fix the costly ones first and document the savings.
What happens after you ask
You send a short request.
Your name, work email, company, and a few lines about the system and the problem. Nothing else is needed to start.
I reply directly.
Expect a direct reply from Peak kW within one business day.
We agree the scope in writing.
We go through your equipment, shifts, pressure needs and electricity bills. You receive a proposal that sets the measurement boundary, deliverables, fee, site access and schedule before any work begins.
I measure your system.
My loggers record power, pressure and flow across a representative operating cycle agreed in the scope.
You receive the findings and we review them together.
A prioritized action list with estimated savings, the assumptions behind every figure, and a proposed way to verify the results.
Before the first call
Have your plant access windows and operating conditions (which areas run, and when) confirmed so we can agree the survey path before the walk-through.
Ready to see this measured on your own system?
Every service starts with metered data from your own equipment, not a vendor's spec sheet.
Already have your equipment list to hand? Describe your facility first (optional)